Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Upland
When a driveway gate sags, binds, or tears loose from its post in Upland, the fix usually comes down to two things: the right part and a weld that holds. Our Gate Parts & Welding crews replace hinges, posts, rollers, rails, and latches across Upland, and we weld them solid enough to stand up to the Santa Ana winds that hammer the north foothills every fall. If your gate is scraping, grinding, or swinging crooked, call us at (350) 238-6295. We answer live, and we’ll get a real assessment of the problem before you hang up.
Key Takeaways for Upland Homeowners
- Hinge replacement in Upland typically runs $220-$480 per hinge, depending on gate weight and whether the post also needs plating.
- Post replacement on decomposed-granite driveways costs $650-$1,800, including cutting the old post, welding the new one, and re-setting the footing.
- We apply the 90-Day Done Right Promise in writing on every weld and part we install.
- A live person answers at (350) 238-6295, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Upland’s Preferred Gate Parts & Welding Company
We’ve been welding and replacing gate parts for over 42 years, founded in 1984, and the work we do in Upland is the same work we’d do on our own mothers’ gates. The crews that roll into Upland are background-checked and uniformed, and they follow the K.E.Y.S. code on every job: Krafted right, Every time, Your home first, Standing behind it. When a Upland homeowner calls about a sagging gate off Mountain Avenue or a binding slide gate near San Antonio Heights, we know what they’re dealing with before we arrive, because we see it every season.
Our reviews from Upland customers lean on the same theme: the gate was fixed right the first visit, the price matched the quote, and nobody had to chase us afterward. That’s the bar. Most jobs are completed in a single visit. If something isn’t right after we leave, the 90-Day Done Right Promise is a written guarantee, not a phone tree. You call, we come back, we make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Upland
Hinge Replacement
Upland’s heaviest gates live in the north end, where ornate wrought-iron swing gates hang on masonry pillars and catch the full force of downslope wind. Those hinges carry hundreds of pounds every day, and wind gusts regularly exceeding 50 mph torque them out of round. When a hinge wears oval, the gate drops, the latch misses, and the operator fights the sag until it burns out. We replace worn hinges with heavier-barrel units, re-weld the hinge plates, and set the gate back to plumb so it closes like it was hung yesterday. A typical hinge replacement in Upland runs $220-$480 per hinge.
Post Replacement
This is the one Upland sees more than Ontario or Montclair. Driveways paved with decomposed granite shift with the wet-season rains and shrink through the dry months, and the posts heave or settle with them. A gate post that has moved even an inch throws the entire swing geometry off. We cut the old post at the base, dig and re-set the footing, weld a new post in at correct plumb, and re-align the operator to match. Post replacement on a Upland DG driveway usually lands between $650 and $1,800 depending on post size, gate weight, and whether the footing needs deeper work.
Rail Repair
Slide gates run on rails, and a rail that has been bent by a shifting driveway or a delivery truck will bind the gate mid-travel and overload the motor. In Upland’s foothill neighborhoods, we regularly straighten or section-replace rails on rack-and-pinion slide gates, then re-shim the rollers so the gate travels cleanly from full open to full close. Rail repair runs $300-$850 on most Upland residential gates. The price is quoted and agreed before any work starts.
Custom Welding
Some fixes are not a part swap. When a decorative scroll cracks, a picket breaks, or a post base plate rusts through along Euclid Avenue’s historic Craftsman properties, we weld it. Our welders are used to working around ornamental scrollwork and keeping the original look, which matters on Upland’s older estate gates and the ironwork near the mid-century neighborhoods. Custom welding is quoted by the job, but most Upland repairs fall between $280 and $1,200.
We also carry and install gate rollers, latches, locks, and strike plates across Upland, including the communities closest to the 210 corridor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Upland
We’re trained and equipped on nine gate-automation brands, and when a Upland job calls for it, we work with Viking, BFT, and Linear operators regularly. That matters because a welded hinge and a misaligned operator should be fixed together, not by two different companies. We stock the common wear parts for these brands in our Inland Empire office, so most Upland repairs finish in one visit instead of two. If your gate motor is fighting a sagging gate, the fix is both the part and the alignment, done once.
Common Gate Parts & Welding Problems We See in Upland Homes
- Hinges ovaled by Santa Ana gusts: Downslope wind off the San Gabriels pushes hard against large swing gates in north Upland, and the repeated torque wears hinge barrels into ovals. The gate drops, the latch stops lining up, and the operator strains until it fails.
- Heaved posts on decomposed-granite driveways: Wet-season rain soaks the DG, it expands and shifts, and posts lean or heave. Then the dry season settles it back at a new angle, and the gate is suddenly scraping or binding where it cleared last summer.
- Rack-and-pinion mesh failures on foothill slide gates: When the driveway shifts under the gate, the rack moves out of line with the pinion gear. The gate grinds, jerks, and eventually the operator overloads. Upland’s north-end slide gates see this pattern repeatedly.
- Corroded strike plates and latch hardware: Upland’s hard mineral-laden municipal water accelerates oxidation on exposed steel, so strike plates, springs, and latch pins corrode noticeably faster here than in coastal cities. We replace them before they fail completely.
Pricing for Gate Parts & Welding in Upland, CA
Here are honest numbers for Upland’s market. A hinge replacement runs $220-$480 per hinge. Post replacement costs $650-$1,800. Rail repair lands between $300 and $850. Custom welding work starts around $280 and goes up with the extent of the damage. Gate roller replacement runs $180-$420 per roller set, and latch and lock replacement typically costs $140-$320. What moves the price is gate weight, post condition, access, and whether we need to re-align the automation after welding. We quote the full price and agree on it before a single bolt is turned. Estimates are free, and we honor a $50 discount on any repair over $250, plus a permanent 5% senior and veteran discount.
We Also Serve Cities Near Upland
While this page focuses on Upland, our Gate Parts & Welding crews also work in Claremont, Montclair, La Verne, and Pomona. If your gate is a few minutes outside Upland, call anyway. We’ll likely be on your street the same week, with the same written promise on the work.
Serving Upland, CA - Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Upland
Because the decomposed-granite driveway under the gate absorbs the rain, expands, and shifts, which throws the rack and pinion out of mesh and knocks the rollers out of alignment. The gate then binds mid-travel and the opener strains. The fix is to re-shim or replace the rollers, re-align the rack to the pinion gear, and often re-set a post that moved. It is not a lubricant problem. Call (350) 238-6295 and we’ll diagnose it properly.
Usually yes. We can brace the gate in position, cut the post at the base, re-set the footing, and weld the new post section at correct plumb while the gate stays hung. It takes longer than a bare post swap, but it keeps your driveway working and your gate in place through the repair. Most post replacements on Upland DG driveways are done this way, and we’ll quote the method and the price before we start.
Not usually. The real question is why the gate is fighting the wind in the first place. If the hinges are worn or the post has heeled, no actuator will last. We check the swing geometry first, replace or weld what has moved, and then match the operator to the actual gate load. In some cases a heavier-duty BFT or Viking actuator is the right call, but only after the frame is square. Call us and we’ll give you a straight answer, not a sales pitch.
We isolate the weld zone, protect adjacent scrollwork with heat shielding, and use the right amperage for the metal thickness so the heat does not travel into the decoration. Then we grind and finish the repair so it matches the surrounding iron. Most of our Upland welders have decades on ornamental iron, and the goal is a repair you can’t spot from five feet away.
The rack teeth and pinion gear are out of mesh, usually because the driveway shifted seasonally or a roller has collapsed. The gate’s weight then rides on the gear alone, and it grinds every time it moves. Left alone, it destroys the rack, the pinion, and the operator gearbox. We re-set the rack alignment and replace whatever has worn. For an exact quote, call (350) 238-6295, estimates are free.
Call Ironworks Gate Co. for Gate Parts & Welding in Upland
Last month our crew was called to a north-Upland equestrian estate off Mountain Avenue, where a Viking-equipped swing gate had sagged far enough to scrape the decomposed-granite approach. The hinge post had heaved during wet-season rains and the post footing was compromised, so we cut and re-welded the hinge post at the correct plumb, replaced the hinge post base plate, and re-aligned the gate operator so it wouldn’t fight the wind. We also added a safety photocell because the original entrapment protection had failed and the owner wanted it back in compliance before the next Santa Ana.
That’s the work we do in Upland. Done right, and backed in writing. If your gate is sagging, grinding, or heaving with the seasons, call us today at (350) 238-6295. A live person answers, and we’ll schedule a straight assessment of what needs replacing or welding, with the price agreed before any work begins.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Upland with gate parts and welding.