Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFAAC Gate Access Control in Covina: What to Know First
We repair, replace, and upgrade FAAC gate access control systems throughout Covina, and most jobs are done in a single visit with pricing settled before we touch a bolt. You will not get a surprise on the bill, and you will not get a technician who needs to “research” your FAAC board. You will get a repair that is done right, backed in writing for 90 days.
This page is for FAAC owners in Covina whose gate has stopped responding to a keypad, remote, phone entry, card reader, or intercom. If your FAAC opener runs fine but will not listen to the access control, that is a control board or receiver problem, and it is our bread and butter. Call (350) 238-6295 and a live person answers, day or night.
How FAAC Products Fail - and How We Fix Them
FAAC builds solid hydraulic and electromechanical operators. The access control side is where we see most of the trouble, and it is almost always repairable. Here is what we actually find on FAAC systems in Covina:
- E024 board relay failure on the 455 D and 391 series. The board still powers the motor, but the relay that should trigger opening from the keypad stops closing. The gate sits there like it never heard you. We replace the relay or the board, not the whole operator. A handyman will tell you the motor is dead and quote you a full replacement. It is not the motor.
- Phantom openings on the FAAC 412 and 415 operators with older plug-in receivers. A weak solder joint on the receiver board lets RF interference trip the open circuit. In Covina, where garage remotes, car alarms, and older home security systems crowd the same frequencies, this shows up as a gate that opens at 2 a.m. by itself. We reflow the joint, shield the receiver, or swap in a newer FAAC-compatible receiver module.
- Keypad membrane failure on the FAAC XKP series keypads. After five to seven summers of San Gabriel Valley sun, the membrane cracks and moisture gets into the contact layer. Buttons start double-firing or not firing at all. A new membrane is a thirty-dollar part and a thirty-minute job. It does not require a new keypad, and it certainly does not require a new operator.
- Capacitor drift on the FAAC 750 and 770 control boards. When the capacitors age, the board misreads the safety edge or photo eye signal and locks the gate out entirely. The gate will not move from any input. A board rebuild with fresh capacitors costs a fraction of a replacement board and keeps your original programming intact.
- Phone entry system not releasing the gate on the FAAC E145. The issue is usually the relay-to-board wiring or a legacy phone line conversion, not the entry panel itself. Covina has a lot of homes built in the 1980s and 1990s with aging phone entry wiring that was never meant to carry today’s signal. We trace it, re-terminate it, and get it talking to the board again.
Our FAAC Gate Access Control Process
Every FAAC job at Ironworks Gate Co. follows the same path, whether it is a keypad rebuild or a full phone entry system replacement. You will know the price before work starts, and you will know what was done when we leave.
- 1
You call. A live person answers at (350) 238-6295. We ask what the gate is doing or not doing, what model FAAC operator you have if you know it, and how long the problem has been there. Then we schedule the visit.
- 2
We arrive and diagnose. Our technician checks the board for error codes, tests the receiver and keypad wiring, verifies the safety sensors, and confirms the operator itself is healthy before pointing a finger at the access control. We do not guess, and we do not fire the parts cannon at your bill.
- 3
We show you what we found and quote a fixed price. If it is a relay, you see the relay. If it is a wire, you see the wire. The price is agreed before any work begins. No hourly mystery fees, no “while we are in there” add-ons.
- 4
We make the repair. We use OEM FAAC parts where they matter, like control boards and safety components. For consumables like keypad membranes and receiver modules, we may use a proven aftermarket equivalent that meets or exceeds the original spec and costs less. We tell you which is going in and why.
- 5
We test everything. Every remote, every keypad code, every phone entry path, the safety edges, the photo eyes. The gate opens when it should and stays closed when it should not. If anything does not pass, it gets fixed before we leave.
- 6
You get the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing, no fine print. That is the Keystone Standard on every FAAC job we finish.
What FAAC Gate Access Control Costs in Covina
We quote every FAAC job upfront, in writing, before any work begins. Here are honest ballpark ranges for the access control work we do most often on FAAC systems in Covina:
- FAAC XKP keypad membrane replacement: $120-$180 installed, depending on wiring condition
- FAAC receiver module replacement or reflow: $140-$260
- 455 D or 391 board relay repair: $90-$190 if the relay is the only fault
- FAAC 750 or 770 control board rebuild: $280-$450, substantially less than a new board at OEM price
- Complete phone entry system replacement on an existing FAAC operator: $650-$1,400 depending on panel type and whether the phone line wiring needs to be redone
- Add a second keypad or card reader to an existing FAAC system: $220-$520 installed
What moves the price is access to the operator, the condition of existing wiring, and whether the system is old enough that the sensible move is a repair on the way to a planned replacement rather than a patch. Either way, you will know the number before we start. Call (350) 238-6295 for a free estimate. We also honor a $50 discount on any FAAC repair over $250, and a free second opinion on any written estimate you have from another company.
Why Covina Homeowners Call Ironworks Gate Co. for FAAC Work
We are not the lowest bid in Covina, and we do not try to be. We are the company that comes out, finds the actual problem, fixes it, and stands behind the work in writing. Victor Salinas grew up in Charter Oak, learned the mechanical and electrical side of this trade at Citrus College in Glendora, and has spent over four decades fixing gates in this city. A gate should open when you need it to and stay closed when you don’t. Everything else is just the work.
We are an independent FAAC service provider, not an authorized dealer. That means we answer to you, not to a manufacturer’s parts quota. It also means we service what is actually on your driveway. If your FAAC operator needs to be retired, we can move you to a LiftMaster, Mighty Mule, Ghost Controls, or DoorKing system and integrate the access control so it still works the way you expect. One call, one company, one bill. The 90-Day Done Right Promise applies to all of it.
FAQs
In most cases, yes. We carry the most common FAAC control board relays, receiver modules, keypad membranes, and wiring components on our vehicles, so a single-visit repair is the norm in Covina. If a specific board must be ordered, we will tell you the timeline before any work begins and give you a written price. Call (350) 238-6295 and we will tell you straight.
Most FAAC operators installed in Covina homes are well outside their original warranty period, so this is rarely a concern. When a unit is still under warranty, we use OEM FAAC parts and follow manufacturer wiring and voltage specs to keep the warranty intact. We will tell you before the repair if that matters for your specific unit.
Most FAAC access control failures we see in Covina are board-level problems, and a board rebuild or targeted relay replacement costs between $90 and $450. A full operator replacement typically runs $1,300 to $3,800 installed. Unless the operator has a mechanical failure like a blown hydraulic pump or a cracked gear housing, repairing the board almost always makes more sense. We will show you the failed part and give you a straight answer either way.
We service every FAAC operator and access control line commonly found in Covina, including the 455 D, 391, 412, 415, 750, 770, E145, and the XKP keypad series. We stock parts for the common failure points and can source anything else quickly. If you are not sure what model you have, we will identify it during the first visit.
Yes. We add and replace phone entry systems, video intercoms, card readers, and smart access modules on existing FAAC operators in Covina. The work typically takes one visit, and we test every input path before we leave. Prices range from $650 to $1,400 for a full phone entry replacement. Call (350) 238-6295 for a free estimate on your setup.
Get Your FAAC Gate Access Control Fixed in Covina
If your FAAC gate will not listen to the keypad, remote, or phone, stop resetting the breaker and call us. We will diagnose it, quote it, fix it, and back it in writing. A live person answers at (350) 238-6295, 24 hours a day, 7 days a week. Free estimates, upfront pricing, and a 90-day guarantee on every FAAC repair we make in Covina.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Covina and nearby areas.