Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pomona
Gate repair in Pomona usually costs between $175 and $520, depending on whether we’re chasing an electrical fault, resetting a leaning post, or rebuilding a gate that the Santa Anas got hold of. Most calls we run in Pomona are finished the same day the crew rolls up. If your gate won’t open, sags on its hinges, or makes a sound like a bag of rocks every time the motor kicks in, call (350) 238-6295 and a live person will answer, any hour, any day.
We work Pomona differently than a generalist handyman would. The city’s retrofit security gates, bolted onto 1950s and 1970s stucco walls and original wood fences, fail in predictable ways that someone who only fixes gate hardware won’t catch. The footing under the hinge post gives out. The motor overheats fighting a gate that was never square to begin with. A slide gate on a shared driveway off Towne Avenue stalls because the rack wasn’t set for the panel’s true weight. These are Pomona problems, and we know them by address, not by guesswork.
Why Ironworks Gate Co. Is Pomona’s Preferred Gate Repair Company
Ironworks Gate Co. has been a dedicated gate specialist for over 42 years, founded in 1984, and we’re still answering the phone the same way we did in the first year: a person, not a menu. Pomona homeowners call us because the last contractor who touched their gate either disappeared after the first rain, or fixed the symptom and ignored the post slowly pulling away from the fence line. We don’t do that. Every job, from a hinge replacement off Garey Avenue to a commercial slide gate rebuild along Mission Boulevard, carries our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No forms. No argument.
Our crews are background-checked and uniformed. They work the way they’d work at their own mother’s house, which matters when the gate is attached to a home someone has lived in for thirty years. We’re certified on nine opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Pomona’s gate mix runs from old chain-drive units on ranch homes north of Holt Avenue to modern keypad systems in Phillips Ranch, and we carry the parts and the programming know-how for all of it. Victor Salinas, our owner, holds the standard that the 400th job gets the same care as the first.
Scheduling and dispatch are coordinated from our Los Angeles office, with crews serving Pomona locally, so when you call at 10 p.m. because your gate is stuck open and the dog has opinions about it, a real person picks up and gets a truck moving.
Our Gate Repair Services in Pomona
Electric Gate Repair
When a Pomona gate stops responding to the remote or the keypad, the failure is rarely the remote itself. More often it’s a capacitor on its way out, a limit switch that’s drifted, or a control board baked by a summer of 105-degree afternoons. We bench-test the board, replace what’s actually failed, and don’t sell you a motor when the problem was a $30 limit switch. An electric gate repair in Pomona typically runs $210 to $480, parts included, and we settle that price before a single screw comes out.
Automatic Gate Repair
Automatic gates in Pomona carry extra load from the city’s heat basin climate. Operators mounted inside dark metal enclosures on a west-facing wall off Towne Avenue or Garey Avenue can exceed 140 degrees internally on an August afternoon, cooking capacitors and stripping gears years before the manufacturer’s duty-cycle chart says they should. When the arm swings but the gate doesn’t move, or the motor hums and trips, we diagnose the operator, the rack, the chain, and the power feed in one visit. Most automatic gate repairs are completed that same visit, with the correct part off the truck, not ordered and promised for next week.
Hinge & Post Repair
This is the work Pomona’s housing stock demands most. The city’s ring of 1920s-1940s Craftsman and Victorian homes near the historic downtown, and the dense 1950s-1970s ranch and stucco tracts around them, were not built with automated gates in mind. The gates came later, lag-bolted into stucco pilasters or original wood posts that were meant to hold a swing gate, not a 300-pound automated one. When the post leans and the gate drags, tightening the hinge bolts is not a repair. We cut the post free, pour a proper footing, reset it square, and re-hang the gate. Hinge and post repair in Pomona generally runs $340 to $900 depending on the footing depth the post actually needs.
Gate Realignment
A gate that scrapes the driveway or won’t latch in Pomona is usually out of rack, and heat makes it worse. Steel expands in the inland basin summer, binding rollers and shifting the geometry of a swing gate just enough that the latch no longer lines up. We square the frame, true the hinges, and set the pickup points so the gate closes the way it did the day it was hung. On slide gates along Pomona’s narrower lots and shared driveways, realignment often means re-setting the track, re-shimming the rollers, and resetting the end stops so the panel doesn’t slam or stall.
We also handle lock repair, weld and rust repair, and full gate replacement for Pomona homeowners whose existing gate has simply reached the end of its service life. A square deal still applies: upfront price, no surprises on the bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pomona
We’re trained and equipped on nine gate-automation brands, including Linear, Viking, and DoorKing, which covers the vast majority of what’s installed on Pomona driveways and commercial lots. We carry common boards, remotes, photocells, and limits for these brands on the truck, so a Pomona repair doesn’t stall waiting on a part from a distributor. For older DoorKing slide operators on the industrial corridor, we keep replacement limit switches and battery backups in stock precisely because those units run hard and fail at the worst time.
Common Gate Repair Problems We See in Pomona Homes
- Sagging swing gates on lean-prone posts: The quiet failure under most sagging gates in Pomona’s 1960s tracts isn’t the hinge; it’s the post footing. Original posts were sized for a manual gate. Add 300 pounds of automated steel, and the post slowly leans, taking the gate out of rack. We fix the footing, not just the hinge.
- Operators overheating in the Pomona Valley heat basin: Pomona regularly posts some of the highest summer temperatures in Los Angeles County, and a gate operator sealed in a dark housing on a south-facing wall can cook its own electronics. If your gate opens fine in the morning and trips by 3 p.m., the heat is the diagnosis, and the fix is a properly ventilated install or a higher-duty-cycle operator.
- Slide gates stalled after Santa Ana wind events: Winds funneling down the San Gabriel Mountains through the Pomona Valley push slide gates hard enough to bind them on their tracks. Panels flex under gust loads, the rack jumps, and the opener’s force-sensing shuts the motor down. We re-set the rack, true the track, and add wind-rated stops where the pad allows.
- Loading-dock slide gates failing during peak hours: Along Arrow Highway and Mission Boulevard, commercial slide gates cycle harder than residential units ever will. High-cycle operators overheat, limit switches drift, and the gate stalls with a truck waiting. We stock commercial parts and schedule commercial service to keep the dock moving.
On a shared driveway off Towne Avenue in a 1960s ranch tract, our crew replaced a rack and pinion on a slide gate that kept stalling when Santa Ana winds pushed the panel off its tracks. The original post footing was undersized for the gate operator, so we poured a new footing, reset the hinge post on the pedestrian gate, and added a safety photocell to keep both vehicle and foot traffic moving while we worked. That call is Pomona in one job: shared access, wind, an old footing, and a gate that had to keep working while we fixed it.
Pricing for Gate Repair in Pomona, CA
Gate repair in Pomona falls into predictable bands. A hinge replacement on a pedestrian gate starts around $175. Realigning a standard swing gate runs $210 to $390. Hinge and post repair, which usually means pouring a new footing, runs $340 to $900. Electric and automatic gate repairs run $210 to $520 with parts included. Heavy commercial slide gate work along the Arrow Highway corridor is quoted per job, but a rack and pinion replacement on a 20-foot slide gate typically lands between $700 and $1,300. Every quote is settled before the work starts, in writing, so the invoice matches the number you approved. We don’t run the meter on surprises.
Standing offers for Pomona customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (350) 238-6295 for an exact quote. Estimates are free.
We Also Serve Cities Near Pomona
Our Gate Repair crews cover the broader Pomona Valley, including Diamond Bar, Montclair, Claremont, and La Verne. If you live in one of those communities and your gate is acting up, the same team, the same written promise, and the same live-answer phone apply. You can read more about how we serve the area on our Gate Repair in Pomona page, or just call us directly.
Serving Pomona, CA - Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pomona
Because the hinge post footing, not the hinge hardware, is failing. Most Pomona gates are retrofit security additions bolted to original 1950s-1970s fence posts that were never sized for an automated gate. The post slowly leans forward under the gate’s weight, and every annual sag is the post settling a little more. Tightening hinges masks the problem for a season. The permanent fix is cutting the post free, pouring a proper concrete footing, and re-hanging the gate square, which we do regularly across Pomona’s tract neighborhoods. Call (350) 238-6295 for an assessment and a written price.
It’s not normal, but it is common in Pomona’s heat basin. Steel track and panels expand in 100-degree-plus heat, bind against rollers, and trigger the operator’s obstruction sensor. If your gate only jams on hot afternoons and clears at night, thermal expansion is the culprit. We re-set the track spacing, true the panel, and often swap in rollers rated for the actual expansion range Pomona summers demand. Call (350) 238-6295 and we’ll get it sorted before the next heat spike.
Santa Ana winds funneling down the San Gabriels and through the Pomona Valley hit slide gates with sustained lateral loads they were never engineered for. The panel flexes, the rack jumps, and the operator’s force sensor trips or strips its drive gear fighting the wind. If your gate dies every October through November, the operator is likely oversized for a wind load, not the panel weight. We add wind-rated stops, sometimes re-gear the operator, and set the force limits properly. Call (350) 238-6295 and we’ll look at what the wind is actually doing to your gate.
Yes. Under California law and current UL 325 standards, any automated gate that can close on a person or vehicle needs an entrapment-protection device, and a photocell across the gate opening is the standard for single-family driveways. Many older Pomona gates were installed without them, or with cells that have failed. We install and align photocells on every automatic gate repair we touch, because safety comes before convenience, and a gate is a machine that does not forgive a guess. Call (350) 238-6295 and we’ll check yours.
In most cases, yes. We schedule commercial slide gate repair on the Arrow Highway and Mission Boulevard corridor for off-peak hours, stage parts ahead of time, and work in sections so at least one dock lane keeps moving. On high-cycle operators that failed during peak loading hours, we can often swap the limit switch, rack segment, or capacitor with the gate in place. If the repair requires the gate to be down, we’ll tell you before we start and schedule around your dock calendar. Call (350) 238-6295 to schedule a site look.
If your gate is stuck, sagging, or simply not opening, call Ironworks Gate Co. at (350) 238-6295. A live person answers 24 hours a day, 7 days a week, and we’ll send a background-checked Pomona crew with the right parts on the truck. The price gets settled before we start, in writing. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pomona and the Pomona Valley since 1984. Over 42 years in the trade, and still answering the phone.