Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pomona
Gate parts and welding in Pomona usually means one of two things: a hinge post that has torn loose from a 1960s stucco column, or a slide gate that binds every afternoon when the valley heat hits triple digits. Most of these jobs run $240-$680 for parts and labor, and we can typically schedule Pomona calls within 24-48 hours. If your gate is sagging, dragging, or refusing to close square, call Ironworks Gate Co. at (350) 238-6295. We’ll send a background-checked, uniformed technician who has worked on Pomona’s older tract homes and Arrow Highway industrial gates long enough to know what actually fails out here.
Why Ironworks Gate Co. Is Pomona’s Preferred Gate Parts & Welding Company
We’ve been welding and rebuilding gates for over 42 years, and Pomona’s housing stock is some of the most demanding we see in Los Angeles County. The city’s core ring of 1920s-1940s Craftsman homes near the historic downtown sits beside dense 1950s-1970s ranch and stucco tracts that make up most of the residential call volume. Nearly every gate on those properties is a retrofit security addition bolted to original wood or masonry fencing that was never designed to carry an automated gate’s lever arm. That changes the job. You’re not just swapping a hinge; you’re rebuilding a post footing or re-anchoring to the original framing.
Pomona customers keep our phone ringing for a reason. We answer live, 24 hours a day, seven days a week. No voicemail tree, no callback queue, no “we’ll get back to you Monday.” When a gate fails on a Friday evening near Ganesha Hills or Phillips Ranch, the homeowner wants to talk to a person. They get one.
Victor Salinas, who leads Ironworks Gate Co., built the company’s K.E.Y.S. values code around a simple idea: Krafted right, Every time, Your home first, Standing behind it. Our technicians work in your driveway the same way they’d work in their own mother’s. Every job is backed by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Pomona
Hinge Replacement
On Pomona’s older ranch tract homes, hinge replacement is rarely just hinge replacement. The original weld-on hinges attached to a 1960s gate post may look fine, but the post itself is often rusted through at the base or pulling out of an undersized masonry column. We cut out the old hinge tabs, assess what the post can actually hold, and weld new heavy-gauge tabs that are sized for an automated gate, not a 40-year-old manual swing. If the post is too far gone, we’ll tell you before we weld. A hinge on a dead post is a hinge you’ll pay for twice.
Post Replacement
This is the single most common call we run in Pomona, and it’s not close. The historic property-crime wave pushed thousands of aftermarket security gates onto 1950s-1970s tract homes and older masonry walls that were never engineered for automated loads. The posts were set shallow, often in unreinforced concrete, and after a decade or two of a gate swinging or sliding off them, they lean, crack, or tear out entirely. We cut out the old post, pour a deeper footing, set new steel in it, and weld the gate back with tabs that won’t quit. Done once, done right.
Rail Repair
Slide gates along Pomona’s industrial corridor on Arrow Highway and Mission Boulevard live a hard life. They carry loading-dock duty cycles that residential gates never see, and they do it in an inland heat basin that routinely hits 105°F. Metal tracks expand, rollers bind, and rails bend or snap. We straighten what can be straightened and replace what can’t, then re-set the roller spacing so the gate rides square under load. For warehouse owners, a gate that binds on a Monday morning costs more than the repair. We know that.
Custom Welding
Some Pomona gates were never built right in the first place. We see thin-wall tubing, undersized diagonal bracing, and welds that were never cleaned before paint. We fabricate and weld gates the way your grandfather’s blacksmith would have: full-penetration joints, proper gussets, metal thickness matched to the gate’s actual weight and travel distance. If a neighbor’s gate is sagging because the fabricator cut corners, we can fix the structure rather than hide it. Our Gate Parts & Welding team does this work every day, across nine opener brands and every gate style common in Pomona.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pomona
Ironworks Gate Co. is certified to service nine major gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Pomona jobs we regularly work on BFT operators on older estate gates, Linear and Viking units on commercial and multi-family properties, and Ghost Controls retrofit kits on residential security gates. We keep common parts and control boards stocked for these systems, which means faster turnaround when a Pomona gate goes down on a hot afternoon or a Santa Ana wind event leaves a panel out of square. You don’t have to wait on a parts shipment from across the country.
Common Gate Parts & Welding Problems We See in Pomona Homes
- Hinge posts pulling out of 1950s stucco columns. The concrete in those original columns was never sized for an automated gate’s lever arm. The post tears loose, the gate sags, and the opener strains until it burns out. We cut out the old post and pour a proper footing before re-welding the hinge tabs.
- Slide gates racking on Arrow Highway and Mission Boulevard. Heavy commercial slide gates on loading-dock fencing expand in 105°F heat, and when metal tracks grow, rollers bind and rails bend. By October, after a full summer of heat cycling, many of those rails are structurally fatigued.
- Undersized setbacks cooking control boards. Aftermarket operators installed on retrofit gates often sit too close to the gate post. The motor fights the geometry every cycle, overheats, and the control board gives out. We correct the setback and replace the board only when it’s actually dead.
- Lightweight swing gates bending in Santa Ana winds. Fall wind events funnel down the San Gabriels and through the Pomona Valley hard enough to physically bend thin-wall tube gates. A gate that weighs too little for its wind exposure is a welding job, not a hardware fix.
Pricing for Gate Parts & Welding in Pomona, CA
Here’s what you can expect to pay in Pomona, straight up. Hinge replacement on a residential swing gate typically runs $240-$420, including new heavy-gauge tabs and labor. Post replacement runs $450-$900 depending on footing depth and whether we’re working in soil or cutting out an existing concrete column. Rail repair on a slide gate runs $350-$750, and custom welding starts around $180 for smaller reinforcements and goes up based on the size of the job. Every quote is given before any work starts, in writing, and the price we quote is the price you pay. No surprises on the bill. Call (350) 238-6295 for a free estimate, and ask about our $50 Off Any Repair Over $250 and the permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Pomona
Ironworks Gate Co. provides Gate Parts & Welding in Pomona and the surrounding communities. Our crews regularly run to Diamond Bar, Montclair, Claremont, and La Verne, bringing the same written 90-Day Done Right Promise and upfront pricing to every job. If you’re near the Pomona Valley and your gate is sagging or binding, call us. We’ll be there when we say.
Serving Pomona, CA - Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pomona
Hinge posts fail on Pomona ranch tracts because the original stucco columns were poured for a manual gate, not an automated one. When a 300-pound swing gate motorizes, the lever arm multiplies the load on the post several times over, and the unreinforced concrete cracks or the embedded post rusts at the base. The fix is a deeper footing and new steel, not a bigger hinge. Call (350) 238-6295 and we’ll tell you if your post is worth saving or needs a full replacement.
Yes, most older LiftMaster operators can accept a retrofitted photocell and safety edge, and the job is typically $180-$350 including parts and wiring. We wire the sensors to the existing control board and test them under load. If the board is obsolete and no longer supported, we’ll show you the replacement option before doing anything. On a 1960s ranch street near Westmont, our crew reset a sagging swing gate whose hinge post had torn out of an unreinforced masonry column; we cut out the rusted post, poured a deeper footing, welded new heavy-gauge hinge tabs, then re-hung the gate with the original LiftMaster operator now opening square and quiet.
The track is the problem in most cases. Arrow Highway sees heavy truck traffic, and the ground vibration plus summer heat expansion loosens rail anchors and widens the roller gap. Once the gap exceeds the roller’s shoulder, the gate walks off the track. We re-anchor the rail, re-set the roller spacing, and replace any bent sections. Expect $350-$750. Call (350) 238-6295 for an exact quote, and estimates are free.
Most of the time, the sagging panel is a welding and post problem, not an operator problem. If the hinges and post are sound, we can weld reinforcement into the panel and re-hang it for $300-$600. If the post has pulled out of an old stucco column, we fix that first and keep your existing operator if it’s still working. Replacing a healthy operator is a waste of your money, and we’ll tell you that plainly. Call (350) 238-6295 and we’ll assess it honestly.
Because Pomona sits in an inland valley basin that routinely records some of the highest temperatures in Los Angeles County. Summer heat expands the metal track and the gate itself, so the operator pulls more amps on every cycle. If it was installed with a tight setback or a marginal power supply, it overheats and the control board fails. The fix is correcting the geometry and, in some cases, venting the operator housing. We see this every July and August in Pomona, and we’d rather fix the cause than keep replacing boards. Call (350) 238-6295 before the next heat wave.
Gate Parts & Welding in Pomona: Older Gates, Honest Answers
Pomona’s gates are, by and large, older than the operators that drive them. The city’s property-crime history meant that aftermarket gates went up fast, bolted to walls and posts that predate modern safety standards. On a 1960s ranch street near Westmont, our crew cut out a hinge post that had quietly rusted through inside a masonry column, then poured a new footing and welded tabs sized for the gate’s actual weight. That job taught us what we see all over Pomona: the hardware isn’t the problem. The foundation is.
When we evaluate a gate in Pomona, we start with the post, the footing, and the setback. If that foundation is solid, we’ll weld what needs welding and replace what needs replacing. If it’s not, we’ll tell you before we spend your money. Sometimes a $350 weld is the right answer. Sometimes the honest answer is that the gate has 18 months left and a new post or panel costs less than three more repair calls. We’ll give you the straight read either way.
Our crew runs Pomona daily, from the historic Craftsman ring near downtown to the stucco tracts around Westmont and the warehouse corridors along Arrow Highway and Mission Boulevard. We know the heat-basin failure patterns, the wind-season damage, and the difference between a gate worth saving and one that’s done. When you call (350) 238-6295, a live person answers. We’ll schedule a visit, show up when we say, give you a written price before any work begins, and stand behind the job with our 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pomona since 1984.
Call Ironworks Gate Co. at (350) 238-6295 for a free estimate on gate parts and welding in Pomona. A live person answers 24 hours a day, seven days a week. Ask about the $89 Seasonal Tune-Up, the Free Second Opinion on Any Written Estimate, and the 90-Day Done Right Promise. We’ll be there when we say, and the price we quote is the price you pay.